McAfee DR SOLOMON S ANTI-VIRUS 8.5 User Manual page 159

2. Select the Notify Alert Manager checkbox to have the module send alert
messages to Alert Manager for distribution.
Alert Manager is a separate Dr Solomon's software component that
collects alert messages and uses a variety of methods to send them to
recipients that you specify. To have the Internet Filter module send these
alert messages successfully, you must also set up the Alert Manager
Client Configuration utility.
Configuration utility" on page 306
You can pass alert messages directly to an Alert Manager server, or you
can send alert messages as text (.ALR) files to a Centralized Alerting
directory that the Alert Manager server checks periodically.
NOTE: Clearing this checkbox tells the Internet Filter module not to
send an alert message via Alert Manager, but does not affect other
alert messages that you configure in this property page.
3. Select the Sound audible alert checkbox to have the module beep when
it finds an infected file.
You can change the setting for this option only if you select Prompt for
user action in the Action property page. Otherwise, the checkbox will
display and use the setting it had when you last chose the Prompt for
user action item. The module will sound the standard system warning
beep or .WAV file you have your computer set to play.
4. Select the Display custom message checkbox to have the module add
a custom message to the alert box it displays when it finds an infected
file.
As with the audible alert, you can change the setting for this option only
if you choose Prompt for user action in the Action property page. If you
do not choose that item in the Action page, no alert box will appear and
you will not see a custom message even if you select this checkbox.
5. Enter the message you want the module to display in the text box
provided. You can enter a maximum of 250 characters here.
6. Click the Report tab to choose additional Internet Filter module options.
To save your changes without closing the Internet Filter Properties
dialog box, click Apply. To save your changes and close the dialog box,
click OK. To close the dialog box without saving your changes, click
Cancel.
NOTE: Clicking Cancel will not undo any changes you already
saved by clicking Apply.
Using the WinGuard Scanner
See "Using the Alert Manager Client
for details.
User's Guide 159