McAfee DR SOLOMON S ANTI-VIRUS 8.5 Administrator's Manual page 193

The SecureCast service alerts you that an InfoPak has arrived with the Flash
message shown at the bottom right corner of
IMPORTANT: If you are a corporate user and have a high-speed
Internet connection, the window may list Register Now as an already
received InfoPak. Continue with
If you have a slower connection, or if there is unusually heavy traffic at
the SecureCast service site or your site, the window might not list any
InfoPaks. In that case, minimize or close the BackWeb window. After
some time, you will receive a Flash message. Click the flashing message,
then continue with
To register for the Enterprise SecureCast channel, follow these steps:
1. If you see Register Now listed in the window, double-click it. The
SecureCast service Flash banner appears
2. Click the banner. The Network Associates Welcome panel appears
(Figure D-11).
Figure D-11. Network Associates Welcome panel
3. Review the information shown, then click Register Now at the bottom of
the panel.
Using the SecureCast Service to Get New Data Files
Step
Step 2.
Figure D-10. SecureCast Flash banner
Figure D-9.
1.
(Figure D-10).
Administrator's Guide 193