Table of Contents
Advertisement
Installing the BackWeb client and SecureCast service
Setting up SecureCast service and the BackWeb client is a two-phase process:
1. Download and install the BackWeb client
2. Register to receive SecureCast service InfoPaks
To get started with the SecureCast service, review the system requirements
shown below, then follow the steps outlined in each section.
System requirements
The BackWeb client software will install and run on any personal computer
equipped with:
• An Intel processor or a compatible processor
• Windows 95, Windows 98, Windows NT or Windows 2000
• At least 10
other downloads
• An active Internet connection—direct or dial-up—for a minimum of one
hour per week.
Phase 1: Download and install BackWeb
1. To download the BackWeb client software, connect to the Network
2. Double-click the program icon to start.
free hard disk space, plus sufficient space for product and
MB
Associates website at:
http://www.nai.com/asp_set/anti_virus/alerts/register.asp
Next, download the file ESC_501.EXE to a temporary directory on your
hard disk.
If your product came on CD-ROM, select the SecureCast service from the
choices on the installation CD-ROM, or locate the file ESC_501.EXE on
your CD-ROM.
As soon as Setup has extracted the necessary installation files, the first
BackWeb Setup panel appears (see
Using the SecureCast Service to Get New Data Files
Figure D-1 on page
188).
Administrator's Guide
187
Advertisement
Table of Contents
