McAfee DR SOLOMON S ANTI-VIRUS 8.5 Administrator's Manual page 168

Using Dr Solomon's Anti-Virus Command-line Options
2. Change to the Dr Solomon's Anti-Virus program directory, in which the
3. Type scan, followed by the scan options you want to use, at the
4. To run another scan operation, repeat
The tables on the following pages list all of the Dr Solomon's Anti-Virus
options available.
The following table lists the options that can be added to the SCAN command.
Table C-1. Dr Solomon's Anti-Virus command-line scanner options
Command-line
Option
/? or /HELP
/ADL
168 Dr Solomon's Anti-Virus
file SCAN.EXE is located. If you installed Dr Solomon's Anti-Virus with
its default options, type this line at your command prompt to locate the
correct directory:
C:\progra~1\networ~1\viruss~1
command prompt.
Dr Solomon's Anti-Virus Command Line will start immediately and
begin scanning your system with the options you choose. When it has
finished, it will display the results of its scan operation, then return to the
command prompt.
Prompt window, type exit at the command prompt. If you restarted
your computer in DOS mode, type win to start Windows, or restart your
computer as you would normally.
NOTE: When you specify a file name as part of a command-line option,
you must include the full path to the file if it is not located in the Dr
Solomon's Anti-Virus program directory.
Limitations
None
On-demand
scanning only
Step
Description
Displays a list of Dr Solomon's Anti-Virus
command-line options, each with a brief
description.
Scan all local drives—including compressed drives
and PC cards, but not disks—in addition to any
other drive specified on the command line.
To scan both local and network drives, use the
/ADL and /ADN commands together in the same
command line.
OS/2: /ADL includes the CD-ROM drive in the
scan, when used with /NODDA.
3. To close the MS-DOS