McAfee DR SOLOMON S ANTI-VIRUS 8.5 Administrator's Manual page 120

Updating and Upgrading Dr Solomon's Anti-Virus
120 Dr Solomon's Anti-Virus
Figure 6-2. Automatic Update Properties dialog box -
• Change definitions for an existing update site. Select a site shown in
the update site list, then click Edit to open the Automatic Update
Properties dialog box
make, then click OK to save them and return to this dialog box. To
see descriptions and instructions for configuring the available
options, see "Configuring update options" on page
• Remove an existing site from the update site list. Select a site shown
in the update site list, then click Delete.
• Specify the order in which the AutoUpdate utility should connect to
the listed sites. To position a site so that the utility tries it earlier,
select the site, then click Move Up. To designate a site as lower in
priority, select the site, then click Move Down.
• Update your files immediately from the sites listed in the update
list, using default configuration options or the options you chose for
this task. Click Update now.
To use this function, you must have configured enough of the
necessary options for the AutoUpdate utility to locate the listed site
and, if necessary, log on to it. See
page 122 to learn how to specify the options you need.
If AutoUpdate cannot connect to the listed site after three attempts,
or if it does not find new .DAT files, it will connect to each of the
other sites listed until it finds the most current .DAT files available.
Update Options page
(Figure 6-2). Make the changes you want to
"Configuring update options" on
122.