Setting The Delay Time - Denon AVR-1506 Operating Instructions Manual

ENGLISH
System Setup
4 CURSOR F F G G
Press the or
surround back speaker type, then press the
CURSOR H H
ENTER
or button to switch to the
number of surround back speaker setting.
When "Small" has been selected for the surround speakers,
"Large" cannot be selected for the surround back speakers.
5
CURSOR F F
Press the or
number of speakers to be used for the surround
back channel, then press the
H H
button to switch to the subwoofer setting.
6
CURSOR F F G G
Press the or
subwoofer setting, then press the
CURSOR H H
button to enter the settings and
switch to the Delay Time setting.
• Select "Large" or "Small" not according to the actual size of
the speaker but according to the speaker's capacity for playing
low frequency (bass sound below the frequency set for the
Crossover Frequency) signals. If you are unsure, try comparing
the sound at both settings (setting the volume to a level low
enough so as not to damage the speakers) to determine the
proper setting.
2 Parameters
button to select your
Large:
Select this when using speakers that have sufficient ability to
reproduce bass sound below the frequency set for the
crossover frequency mode.
Small:
Select this when using speakers that do not have sufficient
ability to reproduce bass sound below the frequency set for the
crossover frequency mode. When this is set, bass sound with
a frequency below the frequency set for the crossover
frequency mode is sent to the subwoofer.
None:
G G
button to set the Select this when no speakers are installed.
Yes / No:
ENTER CURSOR
or
Select "Yes" when a subwoofer is installed, "No" when a
subwoofer is not installed.
2sp / 1sp:
Set the number of speakers to be used for the surround back
channel.
If the subwoofer has sufficient low frequency playback
capacity, good sound can be achieved even when "Small" is
button to select your
set for the front, center and surround speakers.
ENTER
or
Input the distance between the listening position and each
speaker to set the delay time for the surround playback.
Preparations:
1
2
3
4
13
ENGLISH

Setting the Delay Time

Measure the distances between the listening position and the
speakers.
FL Center FR
Subwoofer
Listening position
SL SR
SBL SBR
CURSOR F F G G
Press the or button to set the
distance from the front L speaker to the listening
ENTER
position, then press the
button to switch to the front R speaker setting.
CURSOR F F G G
Press the or button to set the
distance from the front R speaker to the listening
ENTER
position, then press the
button to switch to the center speaker setting.
CURSOR F F G G
Press the or button to set the
distance from the center speaker to the listening
ENTER
position, then press the
button to switch to the surround L speakers
setting.
CURSOR F F G G
Press the or button to set the
distance from the surround L speakers to the
listening position, then press the
CURSOR H H
button to switch to the surround R
speaker setting.
System Setup
CURSOR H H
or
CURSOR H H
or
CURSOR H H
or
ENTER
or