Dsp Surround Simulation - Denon AVR-1506 Operating Instructions Manual

ENGLISH
Basic Operation
ENTER
CURSOR F

DSP surround simulation

2 To operate the surround mode and the surround
parameters from the remote control unit
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order each
time the DSP SIMULATION button is pressed:
MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME
2
SURROUND PARAMETER
Press the
enter the surround parameter setting mode.
The surround parameter switches in the following order
each time the SURROUND PARAMETER button is pressed for
the different surround modes.
• When the MONO MOVIE, ROCK ARENA, JAZZ CLUB
SURROUND
and VIDEO GAME mode:
MODE
ROOM SIZE
• When the MATRIX mode:
• When the VIRTUAL mode:
SURROUND
If you do want the bass and treble to be adjusted, turn off
PARAMETER
the tone defeat mode.
CURSOR G
3
Press the
select the various parameters.
4
Press the
various parameters.
• ROOM SIZE setting:
• EFFECT LEVEL setting
• DELAY TIME setting
JAZZ CLUB
button to
EFFECT LEVEL TONE DEFEAT
DEFAULT SURROUND BACK
DELAY TONE DEFEAT
DEFAULT SURROUND BACK
TONE DEFEAT DEFAULT
SURROUND PARAMETER
button to
CURSOR F F G G
or button to set the
27
ENGLISH
• D. COMP. setting
This parameter is displayed during DOLBY DIGITAL playback.
• LFE setting
This parameter is displayed during DOLBY DIGITAL and DTS
playback.
• TONE DEFEAT setting
• SURROUND BACK SPEAKER setting
This parameter is displayed during DOLBY DIGITAL playback.
• DEFAULT setting
Select "YES" to reset to the factory defaults.
5
ENTER
Press the button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Basic Operation