System Setup; Front Display; Setting The Speaker Configuration - Denon AVR-1506 Operating Instructions Manual

System Setup

Use System Setup to customize a variety of settings to suit your listening environment.
For the contents of a system menu and the initial setting of this unit (

Front display

• You can change the settings using the buttons on the remote control unit.
• The AVR-1506 is equipped with an alpha numeric front panel display that can also be used to check and adjust settings. Some
representative front display examples are shown below.
MODE 1
SETUP
[ Display ]
Currently selected line Current setting
Press the CURSOR F F button to execute.
Currently selected line
page 17).
1
MODE 1
Set the
2
Press the
ENTER
CURSOR
3
Press the
the setting, then press the
button to select the parameter.
No.
4
Press the
the new settings.
5
Press the
switch to "AUDIO".
SETUP
button to enter the setting.
CURSOR H H
ENTER
or button to select
CURSOR F F
or
ENTER CURSOR H H
or button to confirm
SETUP
button to finish system set up.
12
ENGLISH

Setting the Speaker Configuration

The composition of the signals output to each channel and the
frequency response are adjusted automatically according to the
combination of speakers actually being used.
1 CURSOR F F
Press the or
front speaker type, then press the
CURSOR H H
button to switch to the center speaker
setting.
2
CURSOR F F
Press the or
center speaker type, then press the
CURSOR H H
button to switch to the surround
speaker setting.
G G
When "Small" has been selected for the front speakers,
"Large" cannot be selected for the center speaker.
3 CURSOR F F
Press the or
surround speaker type, then press the
CURSOR H H
button to switch to the surround
back speaker setting.
When "Small" has been selected for the front speakers,
"Large" cannot be selected for the surround speakers.
ENGLISH
System Setup
G G
button to select your
ENTER
or
G G
button to select your
ENTER
or
G G
button to select your
ENTER
or