Setting The Digital In Assignment; Setting The Auto Surround Mode; Setting The Ext. In Subwoofer Level; Setting The Power Amp Assignment - Denon AVR-1506 Operating Instructions Manual

System Setup

Setting the Digital In Assignment

This setting assigns the digital input terminals of the AVR-1506
for the different input sources.
1
CURSOR F F G G
Press the or button to assign the
input function connected to the COAXIAL 1
ENTER
input terminal, then press the
H H
button to switch the COAXIAL 2 input setting.
2
CURSOR F F G G
Press the or button to assign the
input function connected to the COAXIAL 2
ENTER
input terminal, then press the
H H
button to switch the OPTICAL input setting.
3
CURSOR F F G G
Press the or button to assign the
input function connected to the OPTICAL input
ENTER
terminal, then press the
button to switch the Auto Surround Mode
setting.
• Select "OFF" if nothing is connected.
• "TUNER" and "V. AUX" cannot be selected.

Setting the Auto Surround Mode

The surround mode used last for the three types of input signals
shown below is stored in the memory, and the signal is
automatically played with that surround mode the next time it is
input.
Note that the surround mode setting is also stored separately for
the different input sources.
CURSOR
or
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals in the Dolby Digital, DTS or another multi-
channel format (DOLBY PL
e Multi-channel signals in the Dolby Digital, DTS or another multi-
channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
CURSOR F F
Press the
Surround mode, then press the
H H
button to switch the Ext. In Subwoofer Level
CURSOR
or
setting.
CURSOR H H
or
Set the method of playback of the analog input signal connected
to the EXT. IN terminal.
Press the
subwoofer channel level playback, then press the
ENTER
Amp Assignment setting.
II x Cinema)
G G
or button to select the Auto
ENTER CURSOR
or
Make this setting to switch the power amplifier for the surround
back channel to ZONE2.
Surround back
ZONE2
Press the
or "ZONE2", then press the
button if you want to start the settings over from the
beginning.
16
ENGLISH

Setting the Ext. In Subwoofer Level

CURSOR F F G G
or button to select the ext. in
CURSOR H H
or button to switch the Power

Setting the Power Amp Assignment

SPEAKER OUT
Power Amp
Assign.
MAIN ZONE
7.1ch system
5.1ch system
CURSOR F F G G
or button to select "S. Back"
ENTER
ENGLISH
System Setup
ZONE2
–
2ch system
CURSOR H H
or