Setting The Delay Time - Denon AVR-1803 Operating Instructions Manual

Setting the delay time

• Input the distance between the listening position and the different speakers to set the delay time for the surround mode.
Preparations:
Measure the distances between the listening position and the speakers (L1 to L4 on the diagram at
the right).
L1: Distance between center speaker and listening position
L2: Distance between front speakers/subwoofer and listening position
L3: Distance between surround speakers and listening position
L4: Distance between surround back speaker and listening position
CAUTION:
Set the center speaker at the same distance from the front speakers (left and right) or the
subwoofer, or so that the difference in distance (L2 – L1) is 5 feet or less.
Set the surround speakers (left and right) at the same distance from the front speakers (left and right)
or the subwoofer, or so that the difference in distance (L2 – L3) is 15 feet or less.
Set the surround back speaker at the same distance from the front speakers or the subwoofer, or
so that the difference in distance (L2 – L4) is 15 feet or less.
1
NOTE:
• The speaker distance can be adjusted between 0 and 60 feet in steps of 1 foot.
2
NOTE:
• No setting when "None" has been selected for the center speaker.
3
NOTE:
• No setting when "None" has been selected for the surround speakers.
Use the (left) and (right) buttons to set the distance from the front speakers and subwoofer to the
listening position.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
("/SW" appears only when subwoofer = yes.)
Press the ENTER or (down) button to switch to the center speaker setting.
Use the (left) and (right) buttons to set the distance from the center speaker to the listening position.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to switch to the surround speakers setting.
Use the (left) and (right) buttons to set the distance from the surround speakers to the listening
position.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to switch to the surround back speaker setting.
FL Center FR
Subwoofer
L
L
1
2
Listening position
L
2
L
SL
SR
3
L
4
SB
ENGLISH
23