Printing Problems - Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual

Print is wrinkled or rippled
If your paper is smooth, glossy, or coated, try a different type of paper. Use only
I
supported paper types.
Use single-sided printing instead of double-sided printing.
I

Printing problems

The printer times out when connected to a parallel port
Windows users: To change the timeout for transmission retry, refer to the Microsoft
I
Online Help for instructions.
Part of the image is missing or the image is clipped
For more details on page sizes, print areas, and margins, refer to the Phaser 8200
I
Color Printer User Guide. To maximize the image area, you may have to adjust the
margins in your application software.
In your application, check the setting for Image Size.
I
Make sure you have selected the correct paper size in the printer driver.
I
Make sure you have selected Page Setup after changing printers.
I
Problems printing from a specific application
Get information and tips on printing from specific applications (such as QuarkXPress
I
and PageMaker) from the Xerox web site. Refer to page 47 for more information.
Fonts print incorrectly in Windows
If you have downloaded fonts to your printer, or stored additional fonts on the
I
internal hard drive, you may need to reinstall the fonts.
If you are using PostScript fonts, make sure ATM (Adobe Type Manager) is installed
I
and configured properly. ATM software is shipped with your printer.
Text prints in Courier font
The font you have specified is not available so the printer substituted the Courier
I
font. The printer has 136 resident fonts. Other fonts must be set up from the printer
driver to print with each job.
Advanced Features and Troubleshooting Manual
Troubleshooting
56