Changing The Tray Size - Dell 1135 Mono Laser User Manual

Copy mode Letter, A4, Legal, Oficio, Folio, Executive, ISO B5, JIS B5, A5, A6
Print mode All sizes supported by the machine.
Fax mode Letter, A4, Legal

Changing the tray size

The tray is preset to Letter or A4 size, depending on your country. To change the size, you need to adjust the paper
guides.
With one hand press and hold the guide lock, and with the other hand, hold the paper length guide and support
1.
guide together. Slide the paper length guide and support guide to locate them in the correct paper size slot.
Flex or fan the edge of the paper stack to separate the pages before loading papers. Insert the paper into the tray.
2.
After inserting paper into the tray, adjust the support guide so that it lightly touches the paper stack.
3.
Squeeze the paper width guides and slide them to the desired paper size marked at the bottom of the tray.
4.
Support guide
1.
Paper length guide
2.
Guide lock
3.
Paper width guide
4.
Tray 1
Manual tray
Tray 1
Manual tray
Tray 1