Table of Contents
Advertisement
Shooting Consecutively
with Different Expo-
sures (AUTO BRACKET)
The Auto Bracket function automatically
shoots three consecutive shots, with the
specified exposure value as standard, at
three exposure levels, at -0.5EV, 0, and
+0.5EV.
• By default, your camera is set to OFF.
• This function is not available when shoot-
ing with sound.
To shoot with Auto Bracket, follow the steps
below.
1.
Turn the mode dial to 5
ing Mode) or A/M (Aperture Pri-
ority/Manual Exposure Mode).
2.
Press the M
M button.
M
M
The Shooting menu appears.
3.
Press the #$
#$
#$
#$ buttons to switch
between displays as required.
4.
Select [AUTO BRACKET] and
then press the O
5 (Shoot-
5
5
O or $ $ $ $ button.
O
O
5.
Select [ON] and then press the
O or # # # # button.
O
O
O
6.
If you pressed the # # # # button, also
press the M
M
M
M button.
The Shooting Menu closes and [AB] is
displayed on the right side of the screen.
7.
Press the shutter button.
Three consecutive shots are taken, with
the specified Exposure Compensation
value as the standard, at -0.5EV, ±0, and
+0.5EV. After shooting, three still images
are displayed on the LCD Monitor. They
are, from the left, at -0.5EV (darker), stan-
dard compensation, and +0.5EV (brighter).
This setting will be used for shooting until
you change it.
• For how to change the Exposure Compen-
sation see P.60.
• For how to change the White Balance see P.62.
77
3
Advertisement
Table of Contents
