Table of Contents
Advertisement
Shooting
Symptom
Images do not
The power is not on. Or the LCD Monitor is dark. Turn the power on. Or adjust the brightness of
appear on the LCD
Monitor.
The AV cable is connected.
The screen display status is in [SYNCHRO-
MONITOR MODE].
It is set to [Power-Save].
Although it is set to
The lens is dirty.
Auto Focus, it does
The subject is not in the center of the shooting
not focus.
range.
It is a hard-to-focus subject.
A picture is blurred.
You moved the camera when pressing the shut-
ter release button.
When shooting in a dark place (ex. indoor), the
shutter speed slows down and pictures become
easily blurred.
The Shooting Mode is set to R (Multi-Shot) or
The flash does not
3 (Movie).
fire. Or the flash can-
not recharge.
The flash is set to
Batteries are running low.
Even though the
The distance to the subject is greater than 2.9
flash fired, the pic-
meters in Telephoto or greater than 5.0 meters in
ture is dark.
Wide-angle.
The subject is blackish.
The image is too
You are too close to the subject.
bright.
It is over-exposed.
The brightness of the LCD Monitor is odd.
The image is too
The shot was taken in a dark place while set to
dark.
(Flash Off).
It is under-exposed.
The brightness of the LCD Monitor is odd.
The image lacks
The picture was shot in conditions that are hard
natural color.
for Auto White Balance to adjust to.
The date, or record-
The screen display function is set to No Display. Press the DISP. button and switch display.
ing information does
not appear.
The brightness of the
You are using it in a dark place or when Auto
LCD Monitor
Focus range and surrounding brightness are dif-
changes during AF.
ferent.
Cause
(Flash Off).
179
Measure
the LCD Monitor.
Disconnect the AV cable.
Press the DISP. button and switch display.
Set [Power-Save] to off.
Wipe clean with a soft, dry cloth.
Shoot with Focus Lock.
Shoot with Focus Lock or Manual Focus.
Hold the camera with your elbows tight on your
body. Use a tripod.
Use the flash.
Raise the ISO sensitivity.
Switch the Shooting Mode to 5 (Still Image).
Set to Flash Off with the F button.
If using alkaline batteries, replace with a new
set. If using rechargeable batteries, recharge or
use the AC Adapter.
Get closer to your subject and shoot.
Correct exposure. (Exposure correction also
changes the light quantity of the flash.)
Set to Flash Off with the F button.
Use exposure compensation. Cancel Exposure
Time.
Adjust the brightness of the LCD Monitor.
Release the Flash Off with the F button.
Use exposure compensation. Set to Exposure
Time.
Adjust the brightness of the LCD Monitor.
Add a white object to the composition. Or use
Auto Balance in a setting other than Flash shoot-
ing or Auto Mode.
This is normal.
Page
P.17
P.113
P.94
P.24
P.118
-
P.40
P.40
P.73
P.52
P.52
P.12
P.14
P.15
P.52
P.60
P.52
P.60
P.113
P.52
P.60
P.113
P.62
P.24
-
Advertisement
Table of Contents
