Using The Shooting Menu (Iso Sensitivity) - Rollei DR5100 Operation Manual

Using the Shooting Menu (ISO Sensitivity)

To change the ISO sensitivity setting using
the Shooting Menu, follow the steps below.
1.
Turn the mode dial to 5
ing Mode) or A/M (Aperture Pri-
ority/Manual Exposure Mode).
2.
Press the M
The Shooting menu appears.
3
3.
Press the #$
between displays as required.
4.
Select [ISO SETTING] and then
press the O
5.
Press the !"
an ISO setting.
5 (Shoot-
5 5
M button.
M M
#$ buttons to switch #$ #$
O or $ $ $ $ button.
O O
!" buttons to select !" !"
6.
Press the O O O O or # # # # button.
ISO settings are completed.
7.
If you pressed the # # # # button, also
press the M M button.
M M
The Shooting Menu closes and the set-
ting value is displayed on the right of the
screen.
This setting will be used for shooting until
you change it.
66