Inserting The Batteries - Rollei DR5100 Operation Manual

Table of Contents

Advertisement

Inserting the Batteries

If you have already used this camera, follow
the steps below to make sure it is turned off
before removing or loading batteries.
1. Make sure the LCD monitor is turned off.
1
2. Make sure the lens barrier (built-in lens
protection) is closed.
The following batteries can be used in the
camera. Please choose which battery to use
according to your needs.
• AA Alkaline Batteries (LR6) (included)
You can obtain them anywhere, so they are
convenient for travel.
However, in a low-temperature environ-
ment the number of shots you can take will
decrease. Warm the batteries before use.
It is recommended that you use the
rechargeable battery when using the cam-
era for a long time.
• Rechargeable Battery (sold separately)
This is a lithium-ion battery. This is eco-
nomical because you can recharge it using
the battery charger (sold separately) and
use it over and over again. They last a long
time, so they are convenient for travel.
• AA Nickel Batteries (available in stores)
These batteries are not rechargeable.
However, they last a long time as com-
pared with AA Alkaline Batteries when
used with a digital camera.
• Nickel-Hydrogen Battery (available in
stores)
This is economical because you can
recharge and discharge it, and use it over
and over again. Use a charger (available in
stores) for charging.
The battery may be inert and consequently
it may not supply power immediately after it
is purchased or left unused for more than a
month. In such a case, recharge the bat-
tery two or three times before use. The bat-
tery self-discharges with time even if the
camera is not used, so recharge it before
use.
Indication of the number of images
you can take
Battery Type
AA Alkaline Batteries
(LR6)
Rechargeable Battery approx. 400
*1 The number of shots in the Synchro-Mon-
itor Mode (see P.24)
• The number of shots is based on a temper-
ature of 22 degrees Celsius, shooting at
30-second intervals and one out of every
two being shot with the flash. If you set the
camera to the Power-Save mode, the num-
ber of shots you can take will increase. In
addition to the batteries, you can use the
AC Adapter (sold separately).
• The number of shots is for reference only.
If the camera is used for long periods of
time for setting and playback, the shooting
time (the number of shots) will decrease.
12
Number of
Number of
Shots (Normal
Shots (Power-
Mode)
Save Mode) *1
approx. 120
approx. 130
approx. 450

Advertisement

Table of Contents
loading

Table of Contents