Denon AVR-2801 Operating Instructions Manual page 43

Tone control setting
• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
1
SURROUND
PARAMETER
MENU/GUIDE
(Remote control unit)
2
(Remote control unit)
3
ENTER
(Remote control unit)
4 • To select Bass or Treble.
(Remote control unit)
5
ENTER
(Remote control unit)
6
SURROUND
PARAMETER
MENU/GUIDE
(Remote control unit)
• To operate the tone control from the main unit.
1
TONE
CONTROL
(Main ulnit)
2
SELECT
(Main ulnit)
Display the surround parameter
screen on the monitor.
The screen for the selected
*
surround mode appears.
"TONE" cannot be selected
in the Direct mode.
Select "TONE".
Switch to the Tone Control
screen.
• To set the level.
If you do not want the tone to be adjusted, set "Tone
*
Defeat" to "ON".
Enter the setting.
The surround menu screen re-appears.
To end the setting mode, press the surround parameter button again.
The tone switches as follows each time the TONE CONTROL button is pressed.
BASS TREBLE
0 1
With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level.
• To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)
• To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to –12 dB in steps of 2 dB.)
ENGLISH
RC-881
START LEARNED/TX
SYSTEM CALL POWER
SET CALL OFF ON / SOURCE
DVD VDP TUNER SHIFT
1 2 3
TV/DBS PHONO
4 5 6
VCR-1 CD CDR / TAPE CHANNEL
7 8 9
VCR-2/V.AUX
TV/VCR
+10
0
A / B
VOLUME DISC SKIP+
DOLBY / DTS
SPEAKER SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
MASTER VOL.
INPUT MODE ANALOG EXT.IN
DECK CDR/MD
AUDIO CD MUTING
AVR/AVC VIDEO DVD TV
VDP VCR
SYSTEM SURROUND
SETUP PARAMETER 1,6
TUNING
TITLE MENU/GUIDE
BAND
2,4 CH SELECT
ENTER
MODE
3,5
SELECT
STATUS ON SCREEN
MEMORY
DISPLAY RETURN
USE/LEARN T.TONE DVD
SET UP
43