Denon AVR-2801 Operating Instructions Manual page 42

ENGLISH
• Operating the surround mode and surround parameters from the main unit's panel.
1 Turn the SELECT knob to select the surround mode.
• When turned clockwise
DIRECT
1
MATRIX
• When turned counterclockwise
DIRECT
1
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
*
then operate the selector.
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 44.
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK, ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
42
SELECT
(Main unit)
STEREO DOLBY PRO LOGIC
1 1
VIDEO GAME
0 0
STEREO DOLBY PRO LOGIC
0 0
MATRIX VIDEO GAME
1
SURROUND
MODE
(Main unit)
SURROUND
PARAMETER
(Main unit)
5CH STEREO MONO MOVIE
1 1
JAZZ CLUB ROCK ARENA
0
5CH STEREO MONO MOVIE
0 0
JAZZ CLUB ROCK ARENA
1 1
0
0