2
Switch to the Digital In Assignment screen.
ENTER
3
4
Enter the setting.
The System Setup Menu reappears.
ENTER
NOTE:
• "PHONO", "CDR/TAPE" and "TUNER" cannot be selected on the Digital Inputs screen.
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
At the System Setup Menu select "On Screen Display".
2
Switch to the On Screen Display screen.
ENTER
3
Select "ON" or "OFF".
4
Enter the setting.
The System Setup Menu reappears.
ENTER
Select the digital input jack to be assigned to the input source.
• To select the input source
• To select the digital input jack
Select "OFF" for input sources for which no digital input jacks are used.
If "Yes" is selected for "Default", the settings are automatically reset to the default values.
*
ENGLISH
21