Denon AVR-1706 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Stereo Receiver
  5. AVR-1706
  6. Operating instructions manual

Denon AVR-1706 Operating Instructions Manual

Denon av surround receiver avr-1706 operating instructions
Hide thumbs Also See for AVR-1706:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Operating Instructions Manual
AV SURROUND RECEIVER
AVR-1706
OPERATING INSTRUCTIONS
MODE D'EMPLOI

Advertisement

Table of Contents
loading

Related Manuals for Denon AVR-1706

Summary of Contents for Denon AVR-1706

  • Page 1 AV SURROUND RECEIVER AVR-1706 OPERATING INSTRUCTIONS MODE D’EMPLOI...

  • Page 2: Safety Instructions

    2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 ENGLISH FRANCAIS 2 System setup / Configuration système page 38, 39 Speaker Configuration Delay Time page 39, 40 Subwoofer Mode page 40 Crossover Frequency Test Tone page 41 Digital In Assignment page 42 Video Input Mode page 42 page 43 Audio Delay Auto Surround Mode page 43...

  • Page 4: Table Of Contents

    ENGLISH Getting Started Thank you for choosing the DENON AVR-1706 A/V Surround Receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources, such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.

  • Page 5: Getting Started

    Preparing the remote control unit The included remote control unit (RC-1000) can be used to operate not only the AVR-1706 but other remote control compatible DENON components as well. In addition, the memory contains control signals for other remote control units, so it can be used to operate non-DENON remote control compatible products.

  • Page 6: Inserting The Batteries

    ENGLISH Getting Started Inserting the batteries q Remove the remote control unit’s rear Notes on batteries: cover. • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the unit. (The included batteries are only for verifying operation.) •...

  • Page 7: Remote Control Unit

    • The main zone output can be turned on and off with the MAIN button. Easy Setup and Operation • This section contains the basic steps necessary to configure the AVR-1706 according to your Remote control signal listening room environment and the source equipment and loudspeakers you are using.

  • Page 8: Speaker System Layout

    /ohms) are unit and switch the power back on. If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center.

  • Page 9: Connections

    Easy Setup and Operation 2 Connections When making connections, also refer to the operating instructions of the other components. Center Subwoofer speaker To achieve Dolby Digital playback effect, use a unit that can sufficiently reproduce frequencies of under 80 Hz. >...

  • Page 10: Connecting A Dvd Player And Monitor Tv

    Easy Setup and Operation Connecting a DVD player and monitor TV • To connect the video output from the DVD player to the AVR-1706, you only need to choose one connection type. Component video connection offers the best quality (and is required for progressive DVD playback), followed by S-Video, while composite video offers the lowest picture quality of the three connection types.

  • Page 11: Auto Setup

    Easy Setup and Operation POWER SPEAKER A ON/STANDBY SETUP MIC Auto Setup The Auto Setup function of this unit performs an analysis of the speaker system to permit an appropriate automatic setting. 2 Measurement and setting details q: This sets the speaker connection, polarity, and bass reproduction ability.

  • Page 12: Starting Auto Setup

    ENGLISH Easy Setup and Operation Starting Auto Setup CURSOR F F Press the button to start the Auto Setup. • Start the measurements. Measurement of each channel is performed as follows: 1: Only the front speakers (A) are measured, front speakers (B) are not available.

  • Page 13: About Error Messages

    Easy Setup and Operation About error messages • These error displays may be displayed when performing Auto Setup measurement and the automatic measurements can not be completed because of the speaker arrangement, measurement environment, or other factors. Please check the following matters, reset the pertinent items, and measure again.

  • Page 14: Connecting Other Sources

    If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-1706 and the VTR, or if your VTR has a TBC function, turn it on.

  • Page 15: Connecting A Tv/Dbs Tuner

    • With discs on which special copyright protection measures have been taken, the digital signals may not be output from the DVD player. In this case, connect the DVD player’s analog multi- channel output to the AVR-1706’s EXT. IN terminals for playback. Also refer to your DVD player’s operating instructions.

  • Page 16: Connecting A Vcr

    NOTE: • When recording to a VCR recorder, it is necessary that the type of cable used with the playback source equipment be the same type that is connected to the AVR-1706 VCR OUTPUT terminal. Example: VCR IN...

  • Page 17: Connecting The Multi Zone Terminals

    Connection of AM antennas Connecting a room-to-room remote control unit When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.

  • Page 18: Zone2 Speaker Out Connections

    ENGLISH Connecting Other Sources ZONE2 speaker out connections • When the power amplifier is assigned to the ZONE2 output channel at “Power Amp Assignment”, the surround back speaker terminals can be used as the ZONE2 speaker out terminals ( page 35). •...

  • Page 19: Basic Operation

    Basic Operation Playback INPUT MODE ANALOG MASTER VOLUME EXT. IN INPUT SELECTOR SURROUND MODE SELECT SURROUND MODE INPUT SELECTOR VOLUME MUTING INPUT MODE EXT. IN ANALOG Playing the input source Select the input source to be played. Example: CD (Main unit) (Remote control unit) Select the play (surround) mode.

  • Page 20: Listening Over Headphones

    ENGLISH Basic Operation Input mode The AVR-1706 has an AUTO signal detection mode that automatically identifies the type of incoming audio signals, but is also equipped with a manual mode that can be switched according to the type of input audio signals.

  • Page 21: Surround

    Surround Playing audio sources (CDs and DVDs) 2-channel playback modes • The AVR-1706 is equipped with 2-channel playback modes exclusively for music. • Select the mode to suit your tastes. 2 DIRECT mode Use this mode to achieve good quality 2-channel sound while watching images.

  • Page 22: Dolby Pro Logic Ii X (Pro Logic Ii ) Mode

    ENGLISH Basic Operation STANDARD SURROUND PARAMETER SELECT Dolby Pro Logic x (Pro Logic ) mode • To play in the PL x mode, set “S. BackSp” at the “Speaker Configuration” setting to “1sp” or “2sp”. • To play in the PL x mode, set “Surround Back”...
  • Page 23 Basic Operation • PANORAMA setting • DIMENSION setting • CENTER WIDTH setting • TONE DEFEAT setting • SURROUND BACK SPEAKER setting • D. COMP. setting This parameter is displayed during DOLBY DIGITAL playback. • DEFAULT setting Select “YES” to reset to the factory defaults. ENTER Press the button to finish the surround...

  • Page 24: Dts Neo:6 Mode

    ENGLISH Basic Operation INPUT MODE SELECT STANDARD INPUT SELECTOR SURROUND PARAMETER DTS NEO:6 mode STANDARD Press the button to select the DTS NEO:6 mode. The mode switches as shown below each time the button is pressed. DOLBY PL DTS NEO:6 Play a program source.

  • Page 25: Dolby Digital Mode And Dts Surround

    Basic Operation • When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. 2 Surround parameters w DTS NEO:6 Mode: • Cinema: This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
  • Page 26 ENGLISH Basic Operation 2 Surround parameters e CINEMA EQ. (Cinema Equalizer): The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Pro Logic Digital, DTS Surround and DTS NEO:6 modes.

  • Page 27: Night Mode

    Basic Operation INPUT MODE INPUT SELECTOR STANDARD/NIGHT Night mode When listening at night or at lower volumes, the night mode improves listenability. NIGHT Press and hold the button for several seconds to enter the night mode. • Canceling night mode: Press and hold the NIGHT button again.

  • Page 28: Denon Original Surround Modes

    ENGLISH Basic Operation DENON original surround modes This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of 7 preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.

  • Page 29: Dsp Surround Simulation

    Basic Operation SURROUND MODE SURROUND ENTER PARAMETER CURSOR F CURSOR G DSP surround simulation 2 To operate the surround mode and the surround parameters from the remote control unit Select the surround mode for the input channel. (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: MONO MOVIE...
  • Page 30 ENGLISH Basic Operation TONE CONTROL SURROUND MODE SELECT SURROUND PARAMETER TONE DEFEAT 2 Operating the surround mode and the surround parameters from the main unit’s panel SELECT Turn the knob to select the surround mode. When turned clockwise: DIRECT STEREO DOLBY PRO LOGIC MONO MOVIE 5CH/7CH STEREO...

  • Page 31: Tone Control Setting

    Basic Operation Tone control setting 2 Adjusting the sound quality (tone) The tone control function will not work in the DIRECT mode. TONE CONTROL Press the button. The tone switches as follows each time the TONE CONTROL button is pressed. BASS TREBLE SELECT...

  • Page 32: Listening To The Radio

    ENGLISH Basic Operation INPUT SELECTOR PRESET POWER SHIFT ON/STANDBY BAND TUNING Listening to the radio Auto preset memory This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory. PRESET • Hold the button and press the switch on the main unit.

  • Page 33: Manual Tuning

    Basic Operation Manual tuning Set the input source to “TUNER”. BAND Watching the display, press the button to select the desired band (AM or FM). MODE Press the button to set the manual tuning mode. Check that the display’s “AUTO” indicator turns off. TUNING –...

  • Page 34: Advanced Operation

    ENGLISH Advanced Operation ON/SOURCE NUMBER MODE 1 MODE 2 Remote control unit Operating DENON audio components MODE 1 Set the switch to “AUDIO”. MODE 2 Set the switch to the position for the component to be operated (CD, CDR/MD or TAPE).

  • Page 35: Preset Memory

    Advanced Operation Preset memory • DENON and other makes of components can be operated by setting the preset memory. • This remote control unit can be used to operate components of other manufacturers without using the learning function by registering the manufacturer of the component as shown in the list of preset codes ( End of this manual).
  • Page 36 ENGLISH Advanced Operation 1. Digital video disc player (DVD) system buttons ON/SOURCE : Power on/standby : DENON DVD power off : Manual search (forward and reverse) : Stop : Play : Auto search (to beginning of track) : Pause 0 ~ 9, +10...

  • Page 37: Punch Through

    : Volume up/down • For CD, CDR, MD and TAPE components, the buttons can be operated in the same way as for DENON audio components page 31). • A TV can be operated when the switch is at the DVD/VDP, VCR, TV position.

  • Page 38: Multi Zone Music Entertainment System

    MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.

  • Page 39: Remote Control Unit Operations During Multi-Source Playback

    Advanced Operation ZONE2 OFF ZONE2 ON INPUT SELECTOR CHANNEL MODE 1 MODE 2 VOLUME Remote control unit operations during multi-source playback (selecting the source) This is only possible when the main unit in the ZONE2 mode page 43). MODE 1 Set the switch to the “AUDIO”.

  • Page 40: Other Functions

    ENGLISH Advanced Operation INPUT SELECTOR POWER SPEAKER Other functions Recording the program source (recording the source currently being monitored) Select the input source to be played. Select the input mode and play (surround) mode. Start recording on the tape or video deck. For instructions, refer to the component’s operating instructions.

  • Page 41: Advanced Setup

    • You can change the settings using the buttons on the remote control unit. • The AVR-1706 is equipped with an alpha numeric front panel display that can also be used to check and adjust settings. Some representative front display examples are shown below.

  • Page 42: Setting The Delay Time

    ENGLISH Advanced Setup CURSOR F F Press the button to select your surround back speaker type, then press the CURSOR H H ENTER button to switch to the number of surround back speaker setting. When “Small” has been selected for the surround speakers, “Large”...

  • Page 43: Setting The Subwoofer Mode And Crossover Frequency

    Advanced Setup CURSOR F F Press the button to set the distance from the surround R speakers to the ENTER listening position, then press the CURSOR H H button to switch to the surround back L speaker setting. CURSOR F F Press the button to set the distance from the surround back L speakers to...

  • Page 44: Setting The Test Tone

    ENGLISH Advanced Setup Setting the Test Tone • Use this setting to adjust to that the playback level between the different channel is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. •...

  • Page 45: Setting The Digital In Assignment

    Advanced Setup Setting the Digital In Assignment This setting assigns the digital input terminals of the AVR-1706 for the different input sources. CURSOR F F Press the button to assign the input function connected to the COAXIAL 1 ENTER CURSOR input terminal, then press the button to switch the COAXIAL 2 input setting.

  • Page 46: Setting The Audio Delay

    ENGLISH Advanced Setup Setting the Audio Delay • When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.

  • Page 47: System Setup Items And Default Values

    Advanced Setup System setup items and default values (set upon shipment from the factory) System Setup Set this to switch the surround back channel’s power 1 Auto Setup amplifier for ZONE2 use. Input the combination of speakers in your system and their corresponding sizes (SMALL for regular speakers, LARGE Speaker for full-size, full-range) to automatically set the composition...

  • Page 48: Troubleshooting

    ENGLISH Troubleshooting If a problem should arise,first check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers, turntable and other components operating property? If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.

  • Page 49: Additional Information

    Additional Information Optimum surround sound for different sources There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 Types of multi-channel signals Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, Super Audio CD, MPEG multi-channel audio, etc.
  • Page 50 6.1 channels but also with conventional 2- to 5.1-channel sources. Furthermore, all the DENON original surround modes ( page 25) are compatible with 7.1-channel playback, so you can enjoy 7.1-channel sound with any signal source.
  • Page 51 Surround The AVR-1706 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.
  • Page 52 • There are two types of DVD Dolby surround recording signals. q 2-channel PCM stereo signals w 2-channel Dolby Digital signals • When either of these signals is input to the AVR-1706, the surround mode is automatically set to Dolby Pro Logic the DOLBY/DTS SURROUND mode is selected.
  • Page 53 Additional Information [3] DTS-ES Extended Surround™ DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360- degree surround impression and space expression thanks to further expanded surround signals.
  • Page 54 ENGLISH Additional Information Surround modes and parameters Mode FRONT L/R CENTER DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC DOLBY PRO LOGIC DTS NEO:6 DOLBY DIGITAL DTS SURROUND 5CH/7CH STEREO ROCK ARENA JAZZ CLUB VIDEO GAME MONO MOVIE MATRIX VIRTUAL C : Signal / Adjustable E : No signal B : Turned on or off by speaker configuration setting Mode...

  • Page 55: Specifications

    Specifications 2 Audio section • Power amplifier Rated output: Front: 75 W +75 W /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) 110 W + 110 W /ohms, 1 kHz with 0.7% T.H.D.) Center: 75 W /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) 110W /ohms, 1 kHz with 0.7% T.H.D.) Surround:...
  • Page 56 ENGLISH FRANCAIS 2 List of preset codes / Liste de codes préréglés Denon 014, *[111] Aiwa Hitachi 006, 011 Konka 012, 013 Magnavox Mitsubishi Panasonic Philips 005, 015, 016, 017 Pioneer 003, 008 Sanyo Sony 002, 019, 020 Toshiba 001, 021, 022...
  • Page 57 Optonica Panasonic 024, 049, 064, 066, 067, 068, 069, 107 Perdio Pentax 009, 013, 023, 058, 090 Philco 015, 016, 049 Philips 015, 021, 042, 049, 105 Pilot Pioneer 005, 013, 029, 036, 037, 038, 045, 085 Portland 025, 055, 090 Proscan 063, 080 Pulsar...
  • Page 58 ENGLISH FRANCAIS Futuretech 020, 036, 037, 040, 044, 058, 066, 088, 119, 120, 125, 147 Goldstar 000, 015, 029, 031, 039, 048, 051, 056, 057, 067, 068, 069, 116 Grundy Hitachi 029, 031, 051, 052, 070, 111, 112, 113, 124, *[134] Hitachi Pay TV Infinity 017, 071...
  • Page 59 Sierra III Sony 049, 067 STS1 STS2 STS3 SRS4 Technisat 077, 078, 079, 081, 082 Toshiba 047, 050 Uniden Denon *[111] Aiwa 001, 035, 043 Burmster Carver 003, 035 FRANCAIS ENGLISH Emerson 004, 005, 006, 007 Fisher 003, 008, 009, 010...
  • Page 60 ENGLISH FRANCAIS Magnavox Marantz Onkyo 016, 018 Optimus 007, 008 Panasonic Philips Pioneer 007, 008, 009 Sony 013, 014, 015 Technics Victor Wards Yamaha 010, 011 *[ ] : Preset codes set upon shipment from the factory. *[ ] : Les codes préréglés diffèrent en fonctiom des livraison de l’usine.
  • Page 61 TOKYO, JAPAN www.denon.com Denon Brand Company, D&M Holdings Inc. Printed in China 00D 511 4320 008...

Table of Contents