Selecting The Dolby Pro Logic Ii X (Pro Logic Ii ) Mode - Denon AVR-1507 Operating Instructions Manual

ENGLISH
Basic Operation
SURROUND PARAMETER
ENTER
ENTER
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Selecting the Dolby Pro Logic
mode
F G F G, ENTER
It is possible to play analog input signals and digital input signals (2-
channels) in the surround mode.
This mode is optimal for playing program sources recorded in Dolby
Surround.
1
[STANDARD]
Press
D H
2
Play a program source.
3
SURROUND PARAMETER
Press
4
F F G G
Press to select the play mode.
CINEMA:
This mode is suited for playing movie sources recorded in Dolby
D H F G
Surround and general sources recorded in stereo.
MUSIC:
This mode is suited for playing stereo music signals in the
surround mode. With music signals, the sound field expansion
differs according to the type of music, the recording conditions
(live/studio), etc.. Because of this, the MUSIC mode offers a
number of optional parameters for further adjusting the sound
field.
[STANDARD]
GAME:
This mode is optimum for games. The GAME mode can only be
SURROUND
used for 2-channel audio sources.
PARAMETER
PL:
This mode is compatible with conventional Dolby Pro Logic sources.
D H F G
II x (Pro Logic II )
II
to select "DOLBY PL x".
II DTS NEO:6
DOLBY PL x
.
22
ENGLISH
5
D D H H
Press to select the item, then press
The mode switches as shown below each time the button is
pressed.
• When the CINEMA mode:
MODE CINEMA CINEMA EQ TONE DEFEAT
DEFAULT SURROUND BACK
• When the MUSIC mode:
MODE MUSIC TONE DEFEAT SURROUND BACK
DEFAULT CENTER WIDTH DIMENSION
• When the GAME mode:
MODE GAME TONE DEFEAT
DEFAULT SURROUND BACK
• When the DOLBY PRO LOGIC mode:
MODE DOLBY PL CINEMA EQ TONE DEFEAT
DEFAULT SURROUND BACK
If you do want the bass and treble to be adjusted, turn off the
tone defeat mode.
When "MUSIC" mode is selected:
PANORAMA:
This is effective when the surround effect seems weak.
DIMENSION:
This shifts the center of the sound field image to the front or
surround side. This compensates for when the sound field image
seems unbalanced. (0 to 6, default : 3)
CENTER WIDTH:
A natural expansion to the front can be achieved by adjusting the
center signal's output balance between the center and front
channels. (0 to 7, default : 3)
6
ENTER SURROUND PARAMETER
Press or
Basic Operation
F F G G
to set.
PANORAMA
.