Connecting The Ipod; Connecting The Power Supply Cord - Denon AVR-1507 Operating Instructions Manual

Connecting Other Sources
®

Connecting the iPod

When using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCK
CONTROL jack on the AVR-1507 with a mini-jack and assign the iPod to any AUDIO and/or S-VIDEO
terminal(s).
The diagram below shows an example of connections for when the iPod is assigned to the DVD/VDP
terminal.
For instructions on assigning the iPod to a specific terminal, see "Setting the iPod Assignment" (
page 38).
For instructions on playing the iPod, see "Playing the iPod" (
• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.
page 33 ~ 35).
iPod
ASD-1R
A
R R
L L
AUDIO OUT
G
S-VIDEO OUT
17
ENGLISH

Connecting the power supply cord

NOTE:
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
• Only use the AC OUTLET for audio equipment. Never use it for hair driers, monitors or other electrical
appliances.
ENGLISH
Connecting Other Sources
AC outlet
(wall)
AC 230 V, 50 Hz
AC OUTLET
• SWITCHED (total capacity – 100 W (0.43 A))
The power to the outlet is turned on and off in
conjunction with the POWER switch on the
main unit, and when the power is switched
between on and standby from the remote
control unit.
No power is supplied from this outlet when
this unit's power is at standby. Never connect
equipment whose total power consumption
exceeds 100 W (0.43 A).