Selecting The Play Mode (Direct/Stereo) - Denon AVR-1507 Operating Instructions Manual

Denon av surround receiver operating instructions avr-1507
Hide thumbs Also See for AVR-1507:
Table of Contents

Advertisement

ENGLISH
Basic Operation
Sources recorded in stereo
Sources recorded in monaural
DIRECT / STEREO
• Effective for achieving pure playback.
• If there is no need for tone control or distribution of the low
frequencies in function of the speaker configuration, select
the DIRECT mode to achieve the best sound quality.
DENON Original Surround Modes
• Select these for 7.1-channel playback with sources
recorded in stereo or monaural.
• The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DTS NEO:6
• This is a surround mode for playing 6.1- or 7.1-channel
stereo sources developed by Digital Theater Systems.
• One of two playing modes, MUSIC (for music sources) or
CINEMA (for movie sources), can be selected according to
your preferences.
II
x *
DOLBY PRO LOGIC
• Developed by Dolby Laboratories, this surround mode
provides 7.1-channel surround sound with conventional
stereo (2-channel) sources.
• Select CINEMA mode for movie surround soundtracks,
MUSIC for music sources, and GAME for 2-channel game
box audio sources.
• Surround modes marked with an asterisk (*) cannot be used when
the surround back speaker is set to "NONE".
II
• The "+PL
x Cinema" mode cannot be selected when only one
surround back speaker is being used.
INPUT MODE
(
page 27, 28)
<SURROUND BACK>
(
page 23)
ENTER
(
page 22)
[DIRECT/STEREO]
ENTER
About the button names in this explanation
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
F G, ENTER
The AVR-1507 is equipped with two 2-channel playback modes
exclusively for music. Select the mode to suit your tastes.
¢ DIRECT mode
This mode is for playing with high quality sound. The audio signals are
transmitted directly, without passing through the tone circuits, etc.
Press
SURROUND
D H
D H
PARAMETER
¢ STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
[STATUS]
D H F G
Press
[STANDARD]
SURROUND
PARAMETER
INPUT MODE
D H F G
20
ENGLISH

Selecting the play mode (DIRECT/STEREO)

[ DIRECT/STEREO ]
to select "DIRECT".
DIRECT
STEREO
[ DIRECT/STEREO ]
to select "STEREO".
Basic Operation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents