Connecting An Ipod; Connecting A Tape Deck, Cd Recorder Or Md Recorder; Connecting The Power Supply Cord - Denon DRA-CX3 Operating Instructions Manual

Connecting an iPod

®
• Use the separately sold Control Dock for iPod (ASD-1R) to connect an iPod to the DRA-CX3.
• When using a Control Dock for iPod (ASD-1R), the communications mode selection switch must be set.
For details, refer to the operating instructions of the Control Dock for iPod.
• When connecting the exclusive Control Dock for iPod (ASD-1R, sold separately), connect the Control
Dock for iPod with the system cable included with the dock.
• When the Control Dock for iPod is connected, the function indicator switches from "LINE1" to "iPod" .

Connecting a tape deck, CD recorder or MD recorder

iPod
L L
R R
System cable
(Included with the Control
Dock for iPod)
Tape deck /
CD recorder /
MD recorder
A
L L
R R
A
L L
R R
ENGLISH

Connecting the power supply cord

AC OUTLET
• SWITCHED (total capacity – 100 W (0.43 A))
The power turns on and off together with
the power switch on the main unit, but not
with the power switch on the remote control
unit. Power is supplied to the AC outlet when
the DRA-CX3 is in standby. NEVER connect
devices with a power consumption of 100 W
(0.43 A) or greater.
7
ENGLISH
AC outlet (wall)
AC 230 V, 50 Hz
Power supply cord
(supplied)
NOTE:
• Insert the plugs securely. Incomplete
connections will result in the generation of
noise.
• Connect the power cord from one of the
components connected to the DRA-CX3 into
the DRA-CX3's AC outlet on the rear panel. Do
not use this outlet for hairdryers or other non-
audio devices.