Listening To The Radio; Auto Preset Memory; Auto Tuning - Denon AVR-1306 Operating Instructions Manual

Basic Operation
INPUT SELECTOR PRESET
•
POWER
ON/STANDBY BAND TUNING

Listening to the radio

Auto preset memory

This unit is equipped with a function for automatically searching
for FM broadcast stations and storing them in the preset
memory.
PRESET •
Hold the button and press the
switch on the main unit.
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at
preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1
to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory
operation is completed.
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the
station, then preset it using the manual "Preset memory"
operation.
• To interrupt this function, press the ON/STANDBY switch.
TUNER
MODE
2 DEFAULT SETTINGS
Auto tuner presets
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 /
A1 ~ A8
90.1 / 90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 ~ B8
POWER
90.1 / 90.1 / 90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
ENGLISH

Auto tuning

1
TUNING
BAND
2
3
4
Automatic searching begins, then stops when a station is
tuned in.
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the "TUNED"
and "STEREO" indicators turn off.
28
Basic Operation
Set the input source to "TUNER".
(Main unit) (Remote control unit)
BAND
Watching the display, press the
select the desired band (AM or FM).
MODE
Press the button to set the auto tuning
mode.
Lights
A 1 F M 8 7 . 5 0 M H z
TUNING + –
Press the ( ) or ( ) button.
ENGLISH
button to