Lexicon RT-20 - REV 0 - 2-05 User Manual page 107

RT-20 Universal Disc Player
When playback of a program chapter or program track list is acti-
vated, playback of a non-programmed chapter or track can activate
while the RT-20 searches for the next programmed chapter or
track.
Note:
Program mode is available for DVD-As, VCDs, CDs and SACDs. Program
mode is not available for DVD-Vs or DVD-R/RWs.
To create a program list:
1. Activate stop mode with the remote control STOP button.
2. Press the remote control PROGRAM button to open the Program
screen shown to the right.
The tracks on the loaded disc are listed in the Track box on the
left side of the screen.
3. Press the remote control
to be added to the program list.
4. When the desired track is highlighted, press the remote control
ENTER button.
The selected track appears in the Program Order box to the
right of the Track listing box.
For DVD-A, tracks can be added to the program list by specifying
group numbers. A group list box is available as shown on the next
page. Bonus tracks cannot be added to a program list.
After a list has been programmed, press PLAY to activate playback
of the track list. To resume normal playback while a program list is
activated, press the remote control CLEAR button.
and buttons to highlight a track
Playback Modes
4-21