Table of Contents
Advertisement
3.3 Starting KX-TVA Maintenance Console
5. The main window is displayed.
6. Click Connect → USB from the menu bar, or click
Connect on the shortcut bar, select USB in the
Connection Mode dialog box and click Next.
Note
•
To connect to the VPS via USB, the KX-
TVA USB driver must be installed on the
PC, as explained above in "Installing KX-
TVA Maintenance Console".
7. Select the VPS as the desired USB device, enter the
administrator password (default: 1234), then click
Next.
Note
•
The administrator password is required to
access the VPS. The System
Administrator can change the password
(see Password in 2.8.1 Administrator in the
Programming Manual).
8. Click Finish when the message Connected! is
displayed.
9. You may now begin programming the VPS. To
choose the area you would like to begin
programming, click the desired icon in the Shortcuts
menu.
Installation Manual
87
Hide quick links:
Advertisement
Table of Contents
