Kx-Td500 Pbx Programming For Dpt Integration - Panasonic KX-TVA594 Installation Manual

4.5 KX-TD500 PBX Programming for DPT Integration

4.5 KX-TD500 PBX Programming for DPT
Integration
Follow the procedure below to program the VPS card(s) for DPT Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer
to the documentation included with the PBX or consult your dealer for more information.
1.
Assignment of the VPS card to be connected to the VPS
Note
• If the VPS card to which the VPS will be assigned is already installed in the KX-TD500, skip
the steps a through d. If a new VPS card is installed in the KX-TD500, follow the steps below.
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot "Card Type" to be installed to "DLC" or "DHLC" card.
c)
Click "Apply" to save the card type assignment.
d)
Set "Status" to "INS".
114 Installation Manual