2.15 Wall Mounting
2.15.1 Wall Mounting the VPS
Mounting on a Wooden Wall
1.
Place the appropriate wall mounting template (found on the last 2 pages of this manual) on the
wall to mark the locations where the 3 screws need to be placed.
KX-TVA50
2.
Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Note
•
Drive the screws into the wall until each screw head is the same distance from the wall.
•
Install the screws perpendicular to the wall.
120 mm (4-3/4 in)
232 mm
(9-1/8 in)
130 mm (5-1/8 in)
KX-TVA200
2.15 Wall Mounting
250 mm
(9-13/16 in)
Installation Manual
71