Yaesu FT-7100M Operating Manual page 56

M S
ENU
Menu Item 27 [ STEP ]
Function: Setting the synthesizer steps.
Available Values: 5.0/10.0/12.5/15.0/20.0/25.0/50.0 kHz
Default Setting: Depends on transceiver version.
Note: This Menu item can be set independently for each band.
Menu Item 28 [ SPCNT ]
Function: Defining the audio path to the external speaker (when used).
Available Values: BAND A/BAND B/BOTH/OFF
Default Setting: BOTH
Note: BAND A: VHF Audio
During V-V operatin, audio from "upper" VHF frequency on the LCD.
During U-U operatin, audio from "lower" UHF frequency on the LCD.
BAND B: UHF Audio
During V-V operatin, audio from "lower" VHF frequency on the LCD.
During U-U operatin, audio from "upper" UHF frequency on the LCD.
BOTH: VHF and UHF audio are both routed to external speaker (internal speaker
is off)
OFF: All audio is routed to internal speaker (external speaker is off).
Menu Item 29 [ TONEF ]
Function: Setting the CTCSS Tone Frequency.
Available Values: 50 Standard CTCSS Tones
Default Setting: 100 Hz
Note: This Menu item can be set independently
for each band, and independently in each
memory.
Menu Item 30 [ TSRCH ]
Function: Activates the CTCSS Tone Search
Scanner.
Menu Item 31 [ TOT ]
Function: Sets the Time-Out Timer.
Available Values: 1 ~ 30 minutes, or OFF
Default Setting: 6 minutes
54
YSTEM
M S
ENU ELECTION
D
ETAILS
CTCSS TONE FREQUENCY ( Hz )
67.0 69.3 71.9
82.5 85.4 88.5
100.0 103.5 107.2
123.0 127.3 131.8
151.4 156.7 159.8
171.3 173.8 177.3
189.9 192.8 196.6
210.7 218.1 225.7
250.3 254.1 –
FT-7100M Operating Manual
74.4 77.0 79.7
91.5 94.8 97.4
110.9 114.8 118.8
136.5 141.3 146.2
162.2 165.5 167.9
179.9 183.5 186.2
199.5 203.5 206.5
229.1 233.6 241.8
– – –