B6Js - Yaesu FT-7100M Operating Manual

The MH-42 is similar to the MH-48

B6JS

keypad and its illumination switch.
PTT Switch
Press this switch to transmit, and release it
to receive.
[ ACC ] / [ P ] / [ P1 ] / [ P2 ] Buttons
[ ACC ] button: This button replicates the
[ P ] button:
[ P1 ] button: This button replicates the functions
[ P2 ] button: This button replicates the functions
You can reprogram the [ ACC ] , [ P ] , [ P1 ] , and [ P2 ]
buttons for other functions, if desired. See page 43.
LOCK Switch
This switch locks out the MH-42
UP/DWN Button
Press (or hold in) either of these buttons to tune (or scan up or down) the band or
through the memory channels. In many ways, these buttons emulate the function of the
(rotary) Main Dial knob.
If you replace the mocrophone from the MH-48
Menu # 17 (MIC ). See page 52 for details.
FT-7100M Operating Manual
MH-42
functions of the trans-
ceiver's [ BAND ] key. In the
European version, press this
button to transmit a 1750 Hz
Burst Tone for repeater access.
This button replicates the functions
of the transceiver's [ V/M ] key.
of the transceiver's [ TONE ] key.
of the transceiver [ LOW ] key.
B6JS
B6JS
, but the MH-42
A6J
buttons (except PTT switch).
Notice
to MH-42
A6J
M
ICROPHONE
does not include a DTMF
B6JS
or vice versa, perfome
B6JS
17