A6J Microphone - Yaesu FT-7100M Operating Manual

MH-48
A6J
PTT Switch
Press this switch to transmit, and release it
to receive.
Keypad
These 16 keys generate DTMF tones dur-
ing transmission.
In the receive mode, these 16 keys can be
used for direct frequency entry and/or di-
rect numeric recall of the Memory channels.
[ P1 ] / [ P2 ] / [ P3 ] / [ P4 ] Buttons
[ P1 ] button : This button replicates the functions of
the transceiver's [ BAND ] key. In the Eu-
ropean version, press this button to
transmit a 1750 Hz Burst Tone for repeater
access.
[ P2 ] button: This button replicates the functions of the
transceiver's [ V/M ] key.
[ P3 ] button: This button replicates the functions of the
transceiver's [ TONE ] key.
[ P4 ] button: This button replicates the functions of the transceiver [ LOW ] key.
You can reprogram the [ P1 ] , [ P2 ] , [ P3 ] , and [ P4 ] buttons for other functions, if desired.
See page 43.
LAMP Switch
This switch illuminate the MH-48
LOCK Switch
This switch locks out the MH-48
UP/DWN Button
Press (or hold in) either of these buttons to tune (or scan up or down) the band or
through the memory channels. In many ways, these buttons emulate the function of the
(rotary) Main Dial knob.
16
M
ICROPHONE
keypad.
A6J
buttons (except keypad and PTT switch).
A6J
FT-7100M Operating Manual