Fax Setup; Getting The Printer Ready To Fax; Setting Up The Printer As A Copier Only Or Fax Only - Lexmark 20R1000 - X 6650 Color Inkjet Fax Manual

Fax Setup

Getting the printer ready to fax

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up
this product or make any electrical or cabling connections, such as the power supply cord or
telephone, during a lightning storm.

Setting up the printer as a copier only or fax only

Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer
software CD that came with the printer.
1 Unpack the printer.
Note: Contents, such as the number of print cartridges, may vary by model.
9
8
7
6
5
1 Power cord
2 Telephone cord
3 Printer software CD
4 USB cable or installation cable
Note: Your printer model may not come with a USB cable. Purchase a USB cable separately.
5 Networking Guide
Note: Your printer model may not come with this publication.
1
2
4
3
6 Fax Guide
Note: Your printer model may not come with this publication.
7 Quick Setup sheet
8 Print cartridges
9 Stick-on overlays for your language
2
Remove tape and packing material from all areas of the printer.
3 Raise the printer control panel.
4 If a stick-on overlay for your language needs to be installed, peel off the covering from the back of the
overlays to expose the adhesive.
Fax Setup
8