Connecting The Machine; Connecting To The Interfaces - Ricoh Aficio MP 2500 General Settings Manual

1. Connecting the Machine

This chapter describes how to connect the machine to the network and specify
the network settings.

Connecting to the Interfaces

This section explains how to identify the machine's interface and connect the
machine according to the network environment.
R CAUTION:
• A Network interface cable with a ferrite core must be used for RF interfer-
ence suppression.
1.
USB port
Port for connecting the USB 2.0 cable
2.
10BASE-T/100BASE-TX port
Port for connecting the 10BASE-T or
100BASE-TX cable
Note
❒ You cannot install these two options at the same time: IEEE 802.11b wireless
LAN board, IEEE 1284 interface board.
ARG003S
3.
IEEE 1284 port (optional)
Port for connecting the IEEE 1284 inter-
face cable
4.
IEEE 802.11b (wireless LAN) port
(optional)
Port for using the wireless LAN
7