Delay; Reverb - DigiTech RP100 User Manual

Modeling guitar processor
Table of Contents

Advertisement

Delay

Delay is an effect that will record a portion of the incoming signal, and then play it back a short
time later.The recording can repeat just once or several times.
Type/Level - The Parameter 1 knob selects one of the 3 different types of Delay, as well as
the volume level of the Delay.
OF - Turns the Delay Effect off.
1d through 9d - These are Digital Delays with Level control.
1A through 9A - These are Analog Delays with Level control.
1P through 9P - These are Ping Pong Delays with Level control.
Delay Time - The Parameter 2 knob adjusts the amount of Delay time. Ranges from 1
through 99(10 through 990 ms), and 1 and 2(1 and 2 seconds).
Delay Feedback - The Parameter 3 knob adjusts the number of repeats. Ranges from 0 to 99.

Reverb

Using reverb in recorded program material gives the listener a sense that the material is being
performed in an actual room or hall. It is this similarity to actual acoustic spaces that makes
reverberation a useful tool in recorded music.
Reverb Type - The Parameter 1 knob selects the Type of Reverb or acoustic space.
Decay - The Parameter 2 knob adjusts the length of the Reverb. Ranges from 1 to 99.
St=Studio
ro=Wood Room
CL=Club
Reverb Level - The Parameter 3 knob adjusts the volume of the Reverb. Ranges from 0 to 99.
24
PL=Plate
CH=Church
HA=Hall
gA=Parking Garage
AP=Amplitheater
Ar=Arena
SP=Spring

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents