Pickup/Wah; Compressor - DigiTech RP100 User Manual

Modeling guitar processor
Table of Contents

Advertisement

Pickup/Wah

The Pickup Simulator lets you get the thick tone of a humbucker pickup from a guitar with
single coil pickups, or the bright edgy sound of a single coil pickup from a guitar with a
humbucker.This allows you to have the best of both worlds without having to change guitars
during a performance.
Wah is an effect controlled by an Expression Pedal making the guitar sound as if it's saying "Wah."
Pickup Type - The Parameter 1 knob selects the Pick Up type which will be simulated.
of - Turns the Pickup Simulator off.
hb - Gives a single coil pick up the warm tone of a humbucker.
sC - Gives a humbucker the unique sound of a single coil.
Wah Type - The Parameter 2 knob selects the Wah Type.
of - Turns the Wah Effect off.
cr - Cry Wah is a traditional sounding Wah.
bt - Boutique Wah is a wider sweeping Wah with a more modern sound.
fr - Full Range Wah sweeps the entire spectrum of audible frequencies.
Wah Position - The Parameter 3 knob adjusts the Wah Pedal Position. Ranges from 0 (toe
up) to 99 (toe down).

Compressor

A Compressor is used to increase sustain, tighten up guitars, and prevent the signal from clip-
ping the input of other effects. It sets a maximum boundary for the strength of a signal.
Comp Type - The Parameter 1 knob selects the Compressor Type (Attack).
of - Turns the Compressor off.
1 to 3 - Controls the length of time it takes for the Compressor to respond to
a signal exceeding the boundary.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents