Getting Started; Making Connections; Mono Operation - DigiTech RP100 User Manual

Modeling guitar processor
Table of Contents

Advertisement

3. Control In - Connect an expression pedal or volume pedal to this jack for the purpose of
controlling Volume, Wah, or Whammy™in the RP100.
4. Headphones - Connect a pair of stereo headphones to this jack.
5. Power Input - Connect only the optional DigiTech PS0913B power supply to this jack.

Getting Started

Making Connections

There are several different connection options available when using the RP100.The following dia-
grams show the connections for some of these options.
Before connecting the RP100, make sure that the power to your amplifier is turned off, and that
the power to the RP100 is disconnected.There is no power switch on the RP100.To turn the
RP100 on or off, connect or disconnect your instrument to the Input Jack (for battery power)
or connect the optional PS0913B power supply from the Power Jack to an AC outlet (for AC
power).

Mono Operation

Connect your guitar to the Input of the RP100. Connect a single mono instrument cable from
the Stereo Output of the RP100 to the instrument input on your amplifier, or to the line input
of a power amp.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents