Speaker Cabinet Emulator; Master Volume - DigiTech RP-7 VALVE User Manual

Section - 4 Effects and Parameters

Speaker Cabinet Emulator

Parameters
On/Bypass
Type
The RP-7 Valve's programmable Speaker Cabinet circuitry allows you to use it in both recording and live situations without lugging heavy
amps and/or cabinets around. Just connect the RP-7 Valve's outputs to a mixing console and kick in the Speaker Cabinet. No miking hassles,
no heavy equipment, just full on miked cabinet sound. Programs can be stored with different Speaker Cabinet settings so you can customize
your Banks for whatever sound types you need. Parameters are as follows:
On / Bypass
Cabinet Type
Note: When headphones are plugged in, the Speaker Cabinet Emulator is engaged globally on all programs. This will affect the
sound at the left and right main outputs.
Volume
Parameters
Pre/Post
Level (EP11)
The RP-7 Valve's Master Volume controls the overall volume level of the selected program. The level can be controlled with the CC
expression pedal for balancing levels in real-time during live performance. It is also useful to lower the overall digital effects level if clipping
occurs.
Pre/Post
Level
20
Displayed Values
O n - B y p
1 . . . 1 0
Turns the Speaker Cabinet Emulator on or off.
Selects the tonal characteristics of the simulated cabinet. There are 10 different cabinet types; 1-3 are
warm cabinets, 4-6 are medium cabinets, 7-9 are bright cabinets, and 10 is a full bandwidth cabinet for
maximum frequency response.
Displayed Values
P r e - p o s t
0 - 1 0 0
Selects whether the Volume pedal effect is pre-digital effects, allowing delays and reverbs to be heard
after the volume is pulled back, or post-digital effects, affecting all volume.
Controls the overall volume level. This can be done with the CC pedal or the Value keys. Variable from 0
to 100.
RP-7 Valve
User Guide