Cabinet Modeling - DigiTech RP 2000 User Manual

The Gain adjusts the amount of drive applied by the Amp Model. Higher amounts of Gain will produce
more break up or distortion. Gain ranges from 0 to 99. Gain is not available on the Acoustic or Direct
Modeling selections.
Amp Level adjusts the overall volume for the selected Amp Model. Amp Level ranges from -15dB to
+15dB.

Cabinet Modeling

The Cabinet Modeling simulates different types of microphoned speaker cabinets.You have your choice of
Cabinet Type, and Mic Placement in relationship to the speaker cabinet.The Cabinet Modeling Parameters
are accessed by using the Amp Model button.
The Type Parameter selects the kind of speaker cabinet that will be emulated.Your choices include: none,
dark, warm, and bright.
The Mic Placement Parameter simulates the placement of the microphone in relation to the speaker cabi-
net. Placing the mic at the center of the speaker will render a fuller sound, while placing the mic towards
the edge of the speaker will sound brighter. Mic Placement ranges progressively from: micp 1 (the edge of
the speaker) to micp10 (the center of the speaker).
EQ
Equalization is an extremely useful tool used to further shape the tonal response of your guitar signal.The
EQ in the RP2000 is similar to the tone knobs on an amplifier. One advantage that the EQ in the RP2000
has over a conventional amp is that it allows you to choose the frequency of the low mid and high mid as
well as the gain applied to the frequency.This gives you the freedom to select the exact tone which needs
adjustment rather than using a generic frequency.
This Parameter is used to turn the EQ on and off.
The Bass Parameter adjust the amount of low end enhancement applied to your signal.The Bass enhance-
ment ranges from -12dB to +12dB.
The Lo-Mid Frequency Parameter lets you select the exact frequency center that will be enhanced by the
Low-Mid Level.The Low-Mid Frequency ranges from 250 Hertz to 2000 Hertz.
The Lo-Mid Level adjusts the amount of enhancement applied to the selected Low-Mid Frequency.The
Low-Mid Level ranges from -12dB to +12dB.
The Hi-Mid Frequency Parameter lets you select the exact frequency center that will be enhanced by the
Hi-Mid Level. Hi-Mid Frequency ranges from 800 Hertz to 5000 Hertz.
The Hi-Mid Level adjusts the amount of enhancement applied to the selected Hi-Mid Frequency.The Hi-
Mid Level ranges from -12dB to +12dB.
The Presence Parameter adjusts the amount of treble enhancement applied to your signal.The Presence
ranges from -12dB to +12dB.
RP2000 User's Guide
Section Three - Effects and Parameters