DigiTech RP-7 VALVE User Manual page 10

Section 1 Introduction
Volume and/or Effects levels should be checked and adjusted accordingly. As always, let your ears be the judge.
• Store - Lights when a Parameter has been changed in a Program. When the <STORE> button is pressed once, the first seven segment LED
in the Display window will flash. Once you have selected the Bank and Program location where you want to store your effects, press the
<STORE> button again (see page 8, under Edit Mode for further information on storing a Program).
4) Value, Store and Edit Buttons - The Value <UP> and <DOWN> buttons allow you to scroll through the RP-7 Valve's Programs, or
change Parameter values in Edit mode. The <STORE> button allows you to store an edited Program in memory for later use. The <EDIT>
button allows you to edit the User and Factory Programs.
5) Parameter Select Buttons -The <LEFT> and <RIGHT> Parameter buttons allow you to navigate the horizontal Effect LEDs of the
Parameter matrix. The <UP> and <DOWN> Parameter buttons allow you to navigate the vertical Parameter LEDs of the Parameter matrix.
These keys are only active in Edit mode.
6) Output Level - Controls the overall output level of the RP-7 Valve. Also controls the overall level of the headphones.
7) Presence - Enhances the high frequency content of the overall sound. This will affect all presets.
8) Expression Pedal - This volume-type pedal allows real time control over Parameters in the RP-7 Valve.
4
RP-7 Valve
User Guide