Wah Wah; Mod/Pitch; Phaser - DigiTech RP-7 VALVE User Manual

RP-7 Valve

Wah Wah

Parameters
On/Bypass
Type
Position (EP1)
The RP-7 Valve offers a classic wah wah effect, which can be used with or without Distortion for that classic Wah-Wah sound. The effect's
position can be controlled with the CC Pedal.
On / Off
Type
Position

Mod/Pitch

Parameters
On/Bypass
Type
Level (EP4)
Is the RP-7 Valve's multi-function module, allowing you to select effects such as; Chorus, Flanger, Phaser, Tremolo, Panner, Pitch Shift,
Whammy™, and Harmony effect. The Parameters of these effects are adjusted in this module.
On / Bypass
Type
Level
User Guide
Displayed Values
O n - b y p
? ? ? ? ? 1 . . . 7
0 . . . 1 2 7
Turns the Module on and off.
The Wah Wah types include; 1. being full-range and 2 through 7 move from darker to lighter tones.
The PEDAL POSITION Parameter reflects the current setting of the continuous control device used to
control the wah effect. This Parameter can be modified manually using the RP-7 Valve's Parameter keys
to perform the wah function. As the Parameter is modified, the tone of the original note will change.
Ranges 0 to 127.
Displayed Values
O n - b y p
C h o r F L A n P H A s
0...100 0...100 0...100
Turns the Module on or off.
Allows you to select a specific type of modulation/pitch effect. The Types are; Chorus, Flanger, Phaser,
Tremolo, Panning, Pitch Shifting, Whammy (Bend), and Harmony.
Controls the overall mix level of the mod or pitch shifting effect. Ranges from 0 to 100.
Section - 4 Effects and Parameters
t r E P A n P t c h
0...100 0...100 0...100
b e n d H a r
0...100 0...100
13