Noise Gate; Equalization - DigiTech RP-7 VALVE User Manual

Section - 4 Effects and Parameters
Gate/Swell
Parameters
On/Bypass
Threshold
Attack Time
The RP-7 Valve's Silencer offers you a professional quality digital noise reduction effect.
On / Bypass
Threshold
Attack Time
Equalizer
Parameters
On/Bypass
Low Gain
Mid Freq
Mid Gain
High Freq
High Gain
The RP-7 Valve offers a three band equalizer. The center frequency of the Mid and High bands is adjustable along with its gain (boost or
cut).
On / Bypass
Mid, High Frequency
Low, Mid, High Gain
12
Displayed Values
O n - b y p
L O - H I
0 . . . 1 0 0
Turns the Gate on or off.
Sets the level at which the Silencer™ gate will open. Ranges are Lo and High.
Controls how fast the Silencer™ gate opens after detecting a signal above the threshold. Large numbers
yield slower attack times, while small numbers give a fast attack. Varies from 0 to 2000 milliseconds (2
seconds).
Displayed Values
O n - B y p
- 1 5 . . . 0 . . . 1 5
1 3 0 . . . 5 0 0 0
- 1 5 . . . 0 . . . 1 5
1 0 0 0 . . . 1 § 0
- 1 5 . . . 0 . . . 1 5
Turns the Gate on or off.
Allows you to select the center frequency of the Mid and High bands. Mid Band ranges from 130 to
16.0 (130 Hz to 16 kHz). High Band ranges from 1000 to 16.0 (1.0 kHz to 16 kHz).
Allows you to boost and cut the frequency. Ranges are from -15 to 15.
RP-7 Valve
User Guide