Quick Start - DigiTech JAMMAN - MANUAL 2 Owner's Manual

Quick Start

1. Get Connected
Before powering up your JamMan
a. Make Connections
1. Connect a guitar or bass to the
Stereo's rear panel.
2. Connect the JamMan Stereo's
amplifier or a channel of a mixer.
b. Connect the Power Supply
1. Start with your amplifier and the JamMan turned off or the mixer
faders at their minimum position.
2. Turn the
the way down on the JamMan Stereo.
3. Connect the PS-0913B power supply to the
JamMan Stereo.
4. Connect the other end of the PS-0913B power supply to an AC outlet.
5. Turn your amplifier on and turn up its volume to a normal playing
level or bring up the mixer's faders to a nominal level.
4
,
LooP LeVeL RHYtHM LeVeL
Stereo:
®
Left (Mono) IN
Left (Mono) oUt
,
MIc LeVeL
jack on the JamMan
to the input of an
, and knobs all
INst LeVeL
jack on the
PoWeR