Bulk Dump; Sending Default Dump; System Dump - DigiTech Artist 2120 User Manual

2120 VGS Artist
2. Using the <2> knob, select the Effect module whose Default you want to dump.
3. Use the <4> knob to select the User Default you want to dump.
4. To initiate the dump, turn the <1> knob. The Information line briefly reads:
after which it returns to the User default screen.
Bulk Dump: This option allows you to dump all resident Programs in memory to an external recording device, like a patch librarian,
computer, or sequencer for backup, storage, or organization. This option dumps all Programs simultaneously. It does not send any 2120
system information (Utility setups), such as SysEx Device channel or Program maps.
To perform a SysEx Bulk Dump of all the 2120 VGS programs, do the following:
1. Press the <Utilities> button and scroll to Page 7 of the Utility menu using the <Page> knob. The display reads:
2. To initiate a bulk dump, turn the <3> knob. The Information line of the display reads
after which the display returns to the Dump screen. Bulk Dumps are very large and may take several minutes to complete.
System Dump: This is the option to use for dumping system data to an external MIDI or SysEx recording device. All the item settings in the
Utility menu are sent using this option. Programs are not included in this dump.
The System Dump procedure is the same as the Bulk Dump procedure (see above), except that to initiate a System Dump, turn the <4>
knob.
User Guide
2
UsrDflt:PreAmp
Yes %kHz --- %kHz
1 2
msdB msdB
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
SEAMLESS
BANK
9 13
PAGE OF

SENDING DEFAULT DUMP...

2
SysEx Dump: Bulk
%kHz %kHz
2
msdB msdB
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
BANK
7 13
PAGE OF
SENDING BULK DUMP...
Section - 6 Advanced Topics
User 1
%kHz U 1
3 4
msdB
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
System
YES %kHz YES
3 4
msdB
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
L/R OUTS
65