DigiTech Artist 2120 User Manual page 59

2120 VGS Artist
Assigning CC Transmit Toggle
The procedure for setting up the CC Transmit Toggle function is as follows:
1. Press the <Utilities> button once. The display reads:
2. Turn the <Page> knob to page 10 until the display reads:
3. Turn the <2> knob to select the bank in which the CC toggle is to used. Once the bank is selected, use the <3> knob to select
the footswitch to be used. The display reads:
Note- Only footswitches currently assigned to control parameters in the 2120 VGS can be used for the CC
Transmit Toggle function
4. The display now shows that footswitch 6 in bank 1 is can be used to toggle CCs. Take notice that from the factory when
footswitches 6-0 can be used for the CC Transmit Toggle function.
5. Now to assign the CC number, just turn the function knob <4> until you have reached the desired CC. The display will now
read something like this:
6. Press <Utilities> to exit the Foot Controller setup menu.
User Guide
2
Output:Stereo
2
1 2
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
1 13
PAGE OF
2
21FC:Bank FS=Prg CCTran
1
1 2
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
10 13
PAGE OF
2
21FC:Bank FS=Tog CCTran
1
1 2
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
10 13
PAGE OF
2
21FC:Bank FS=Tog CCTran
1 2 1
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
10 13
PAGE OF
Section - 5 The 2120 FC
Tuner
Off
3 4
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
DIGITAL
CLIP
1 ---
3 4
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
DIGITAL
CLIP L/R OUTS
6 OFF
3 4
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
DIGITAL
CLIP L/R OUTS
6 127
3 4
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
DIGITAL
CLIP L/R OUTS
53