DigiTech Artist 2120 User Manual page 67

2120 VGS Artist
4. Now turn the <1> knob to make the Preamp active for morphing assignment or if the Volume pedal is to be used and is selected at this
point. Once this is done, press the <Assign> button and the display will appear something like this if this parameter has not already
been assigned:
5. Now select the Expression pedal, and the display will appear something like this if the Morphing parameter has been selected:
6. The <1> knob lets activate or de-activate the selected expression pedal. The <2> knob lets you change the selected pedal. The <3>
and <4> knobs are used to set the minimum and maximum morphing levels between the Tube ( t ) and the Solid State ( d digital). Once
you have made this assignment, make sure to save your changes by pressing the button.
6-b. If the Volume Control parameter has been selected, the display will appear as follows:
6-c. The <1> knob lets activate or de-activate the selected expression pedal. The <2> knob lets you change the selected pedal. The <3>
and <4> knobs are used to set the minimum and maximum volume levels. Once you have made this assignment, make sure to save
your changes by pressing the button.
User Guide
2
Volume Pdl: Morphing
tSO
1 2 3
LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ
FACTORY USER DIST EQ
BANK
2 2
PAGE OF
2
Select a Contrl F.Switch
LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ GATE
DIST EQ
FACTORY USER
2
Morph Exp 1 Min [t50]Max
On PdL
1 2 3
LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ GATE
FACTORY USER DIST EQ
3 19
PAGE OF
2
Morph Exp 1 Min [100]Max
On PdL
1 2 3
LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ GATE
DIST EQ
FACTORY USER
4 19
PAGE OF
Section - 6 Advanced Topics
3
4
CHANGED
GATE L/R OUTS
L/R OUTS
CHANGED
L/R OUTS
L/R OUTS
d50 t50
4
CHANGED
L/R OUTS
L/R OUTS
Off 100
4
CHANGED
L/R OUTS
L/R OUTS
61