Section -2 Setting Up; Making Connections; 2120 Vgs Artist Into Stereo Power Amp - DigiTech Artist 2120 User Manual

Section - 2 Setting Up

Section -2 Setting Up

Making Connections

Because of its flexibility, your 2120 VGS can be connected in several different ways to meet the requirements of specific applications. The
following diagrams offer some ways your 2120 VGS can be connected.
NOTE: In all the diagrams we have shown use of the external FX loop (this is of course, optional).
This is the ideal 2120 VGS Set up. From the output jack of the guitar, run the cable into the Input jack on the front panel of the 2120 VGS. At
this point (if you so choose) you can utilize the mono Fx loop of the unit by running out of the fx send of the 2120 VGS into the desired unit
being used. From there, run from the output (or send) of the chosen unit back into the Fx return jack of the 2120 VGS.
At this point, run out of both the Left and Right output jacks of the 2120 VGS into the respective inputs of the stereo power amp. From the
Stereo power Amp, run out of the Left and Right outputs into the chosen speaker cabinets.
This is an ideal opportunity to see and hear how the masters of stereo effects have outdone themselves in achieving mind-boggling stereo
separation. Stereo Delays, Phasers, Tremolos, and Auto panners will produce effects in this set-up that are simply out of this world.
When using a guitar system set-up such as this, it is always a good idea to make sure all connections are secure. Be sure to keep the levels of
sending and receiving unit even so they do not have a tendency to clip (or distort) the inputs of each unit.
12
2
FACTORY USER
Input
Page
Clip
Left Out
Stereo Power Amplifier
2120 VGS into a Stereo Power Amp
Output
Input
FX Send
Program
Effect
Satch 2
1 0 2 0 3 0 4 100 %
dB dB dB
LINK CHANGED LINK CHANGED LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ GATE
L/R OUTS
SEAMLESS
DIGITAL
CLIP
3 3
1 2
Right Out
2120 VGS Artist
FX Return
User Guide