Linking A Parameter To A Modifier - DigiTech Artist 2120 User Manual

Section - 6 Advanced Topics
expression pedal. Once the External Expression pedal is connected, the assignment procedure to be followed is listed below.

Linking a Parameter to a Modifier

Note- Any changes made during this procedure must be stored with the program to be effective when recalled later.
To link a Parameter to a modifier, please do the following:
1. Scroll to the parameter you would like to link to a modifier (ie: Delay feedback). See page 26 if your not sure how to scroll
through a module's parameters.
2. Press <Assign>, the display will appear something like:
If the currently selected parameter is not already linked, you are taken to the next available link in this menu.
3. Turn the <1> knob to turn the link for that parameter on. The display will look something like this:
4. Use the <2> knob to scroll through the different modifiers that can be linked to the Parameter you want assigned. The options
are:
MIDI CC's (CC): 0-127 & ChP (aftertouch)
Real Time modifiers (RT): LF1, LF2, dY1, & dy2
Expression Pedal (Pdl 1) Exp 1, Exp 2 and Exp 3
Footswitch: (FS#) F1-F10
NOTE: The MUTE and THRU effect types do not have any parameters to connect to, so they will not appear in the
parameter list.
5. Use the <3> knob to select the minimum parameter value you want when the controller is in the maximum position.
6. Use the <4> knob to select the maximum parameter value you want when the controller is in the maximum position.
NOTE: Make sure you store any changes you want to save before moving on.
58
2
Avail Link for: FdBack
%kHz
OFF
1
msdB
LINK CHANGED LINK CHANGED LINK
COMP WAH TUBE EQ GATE
FACTORY USER
SEAMLESS
BANK 1 4
PAGE OF
2
FdBck CC# Min[
%kHz %kHz
on F1
1 2
msdB msdB
LINK CHANGED LINK CHANGED
COMP WAH TUBE EQ
FACTORY USER
SEAMLESS
BANK 19
1
PAGE OF
CHANGED LINK CHANGED
L/R OUTS
L/R OUTS
]Max
%kHz %kHz
-99 Hld
3 4
msdB msdB
LINK CHANGED LINK CHANGED
GATE
L/R OUTS
L/R OUTS
2120 VGS Artist
User Guide