Multi-Effect Modules - DigiTech Artist 2120 User Manual

2120 VGS Artist
Freq Controls the amount of boost / cut applied to the selected frequency. The GEQ 8 uses 1-1/3 octave ISO
standard frequency centers, (Hz) while the GEQ15 and GEQ31 use 2/3 octave and 1/3 octave frequencies.
Boost/cut range for each band is from -12 to 12.
Parametric Equalizers
Parametric EQs offer the added flexibility of letting you define the center frequency you want to adjust, and how many frequencies around that
center frequency you want to affect. Some of the PEQ modules in the 2120 VGS also include high shelf and low shelf EQ bands. A high shelf
allows you select a frequency, and the boost/cut parameter changes the level of all the frequencies above that selected frequency. The low shelf
works the same way but works on frequencies below the selected frequency.
Parametric Equalizer Parameters:
Controls the signal input level fed to the Module. Ranges from Off to 100%.
Level
Phase Inverts the phase of the source signal. Can be set either IN or OUT of phase.
Phase L - R Inverts the phase of the left or right side of the stereo source signal. Can be set either IN or OUT of phase.
LoShlv Freq Selects the center frequency of the low-frequency shelving EQ band. Ranges from 25Hz to 20kHz.
LoShlv Level Adjusts the amount of boost or cut applied to the center frequency of the low-frequency shelving EQ band
(selected by LOSHLV FREQ). Ranges from -12 to 12.
Band # Freq Sets the center frequency of the selected band. 6-band PEQs have four true parametric bands of EQ plus
shelving high- and low-frequency controls with variable frequency. Bands 1 and 2 range from 25 Hz to 20 kHz.
Bands 3 and 4 range from 1 kHz to 20 kHz.
Band # Width Controls the bandwidth of the selected frequency. The higher the setting of WIDTH, the more frequency-
selective the boost/cut becomes. In other words, with High (narrow) WIDTH settings, frequencies around the
selected center frequency are not affected by the LEVEL setting. With Low (Wide) WIDTH settings, frequencies
around the center frequency become affected by the setting of LEVEL.
Band # Level Adjusts the amount of boost or cut applied to the selected frequency. Varies from -12 to 12.
HiShlv Freq Selects the center frequency of the high-frequency shelving EQ band. Ranges from 1kHz to 20kHz.
Adjusts the amount of boost or cut applied to the center frequency of the high-frequency shelving EQ band
HiShlv Level
(selected by HISHLV FREQ. Ranges from -12 to 12.
User Guide
Section - 4 Effects and Parameters
45