Display & Functions; Effect Mode; Menu Mode - Dynacord CMS 1000-3 Owner's Manual

3 Display & functions
The CMS includes a premium OLED display. Compared to general LC displays the OLED display is brighter, has a greater
contrast ratio and a wider viewing angle.

3.1 Effect mode

The start screen appears after switching the CMS on. Af-
ter a few seconds the default effect for FX 1 & FX 2 and
other system parameters are displayed.
Illustration 3-1: Effect mode
1 2
REC STUDIO MIDI
15
BRIGHT HALL
14
5
13
Large Hall 3
FX1
12 11 10
Pressing the function keys below the display allows selec-
ting an effect in a quick and easy way.

3.2 Menu mode

Press the MENU/ENTER rotary encoder in effect mode to
access the menu mode. When entering the menu mode
the main menu (see illustration 3-5) is indicated.
Illustration 3-2: Access the menu mode by pressing the MENU/
ENTER rotary encoder
Illustration 3-3: Main menu in menu mode
Main Menu
Edit FX 1
Edit FX 2
USB Record Routing
Equalizer Routing
3
PEAK AUX 1
4
MONO DELAY
5
55
6
230 ms 40%
FX2
9 8 7
BACK ESC
Number Description
1 Record Routing indicator
2 MIDI indicator
3 USB / PEAK indicator
4 Effect group of effect unit FX 2
5 Effect number of effect unit FX 2
6 Effect description of effect unit FX 2
7 Increases the effect number of effect unit FX 2 by one
8 Description of function key
9 Decreases the effect number of effect unit FX 2 by one
10 Increases the effect number of effect unit FX 1 by one
11 Description of function key
12 Decreases the effect number of effect unit FX 1 by one
13 Effect description of effect unit FX 1
14 Effect number of effect unit FX 1
15 Effect group of effect unit FX 1
In menu mode the MENU/ENTER rotary encoder and the
four function keys below the display are used for naviga-
tion and for selecting and editing parameters. Turn the
MENU/ENTER rotary encoder to the left or to the right to
move the cursor in the menu. Press the MENU/ENTER ro-
tary encoder to select or execute the highlighted menu
item. If a menu entry was highlighted, the corresponding
dialog is opened. If a parameter was highlighted, the val-
ue is shown in inverse font and can be edited by turning
the MENU/ENTER rotary encoder. Press the MENU/EN-
TER rotary encoder again to apply the edited parameter
value. The bottom line of the display indicates the func-
tion for the four function keys. The following table de-
scribes some of the functions avialable in menu dialogs.
Function Description
BACK Returns to the next higher menu level.
ESC Discards all edits in the dialog and returns to effect mode.
 
Move the cursor to the left or to the right.
or
SAVE Opens the FX User Presets list to store the edited effect as an
user preset.
OK Confirms the entry, e. g. when editing the name of an user pre-
set.
Table 3-4: Functions of the function keys
3
CMS
25